Test Pumps
Hydrostatic Testing from 200 psi to 2000 psi
Tru-Test
Tru-Test Hydrostatic Test Pump
Features
- Up to 250 PSI
- Up to 2.2 GPM
- Available in either 120 V AC With 6' Cord or 12 V DC With 25' Battery Cable
- A 20% More Efficient Pump Design
- No More Hand Pumps - May also be Used for Filling Vent Lines and Water Transfer
- On-Off Switch For Operator Saftey
- Liquid Filled Gauge
- Brass Piping
- Inline Check Valve
- 5' Inlet Hose
- 10' Outlet Hose With Quick Disconnect
- Custom Metal Case
- Lightweight (22 lb.)
HT-454
HT-454 Test Pump
HT-454 Hydrostatic Test Pump Features
- Up to 4.5 GPM & 400 PSI
- Mounted in a heavy duty metal case with handle
- Liquid filled 600 PSI pressure gauge
- Compact Design - 12"x12"x8"
- Light Weight - Only 34 pounds
- 10-foot Discharge Hose with Quick Disconnect & Internal Check Valve
- 5' Supply Hose With Filter
HT-89A
HT-89A Test Pump
Features
- 3.0 GPM
- Up to 300 PSI with Pressure Regulator
- 1/2 HP Ball Bearing Motor (115 or 230 Volts) with a 115% service load factor with capacitor starting
- Built-in, full-flow, bypass system
- Pump is 20% more efficient
- Electrical switch for operator safety
- Hose filter
- Lightweight (35 lb.) and Compact Unit
- Liquid-filled, stainless steel gauge
- Swivel inlet connection
- The 10' of quick-disconnect hose has an exclusive built-in, one-way valve to permit the pump from being easily separated from the pressurized system—as is often required by the inspector
HT-90E
HT-90E Test Pump
Features
- Up to 300 PSI Operating Design No Pressure Regulator
- 3.0 GPM
- 1/2 H.P. Ball bearing motor (115V) with capacitor starting
- All brass pipe and fittings
- Check valve holds system pressure if pump is unplugged
- Liquid-filled pressure gauge
- Sturdy, easy-carry handle
- Carrying Weight Only (32 lb.)
- Compact Design 12" L x 12" W x 13" H
- 10 Foot Discharge Hose with a Quick-Disconnect and Internal Check Valve
- Hose Filter
HT-89W
HT-89W Test Pump
Features
- 3.0 GPM
- Adjustable Pressure Relief Valve Preset at the Factory for 200 PSI
- Up To 300 PSI operating pressure with adjustable regulator (Factory preset)
- 1/2 HP Ball Bearing Motor (115 or 230 Volts) with a 115% service load factor with capacitor starting
- Built-in, full-flow, by-pass system
- Pump is 20% more efficient
- Electrical switch for operator safety
- Lightweight and compact, rugged construction
- Swivel Inlet Connection
- Liquid-filled, stainless steel gauge
- 10 Foot Discharge Hot with Quick Disconnect & Internal Check Valve
- Aluminum Cart With 10" Tires
- Shipped assembled (just attach long handle)
HT-95WG
HT-95WG Test Pump
Features
- Adjustable Pressure Relief Valve (0-1200 PSI)
- Gasoline Engine
- Built-In Full-Flow, By-Pass System
- Lightweight and compact, rugged construction
- Includes 10 Feet of Quick-Disconnect, High-Pressure Hose
- Liquid-filled, stainless steel gauge
- Aluminum Cart With 10" Tires
- Shipped assembled (just attach the long handle)