|
- Up to 2.2 GPM
- 120V AC w/6' Cord or 12V DC w/25' Battery Cable
- Up To 250 P.S.I.
- In-Line Check Valve
- 5' Inlet Hose
- 10' Outlet Hose w/Quick Disconnect
- Lightweight (22 lbs)
|
|
|
|
- 3.0 GPM
- 400 PSI
- 10' H P Hose w/ QD
- 5' Supply Hose w/ Filter
|
|
|
|
- 3.0 GPM
- Adjustable pressure relief valve preset at 300 P.S.I.
- 1/2 H.P. ball bearing motor (115 or 230 volt)
- Lightweight (35lbs) and compact unit
- 10' of quick-disconnect hose has an exclusive built-in, one-way valve to permit the pump from being easily seperated from the pressureized system - as is often required by the inspector
|
|
|
|
- 3.0 GPM
- Up to 300 P.S.I. operating design No Pressure Regulator
- Carrying weight only (32 lbs)
- Compact design 12" L x 12" W x 13" H
- Furnished with 10 feet of hose with a quick-disconnect and check valve
|
|
- Up to 6.5 GPM @ 300 PSI
- Only 52 LBS.
- Built-In By-Pass System
- Enclosed Gear Reduction
|
|
|
|
|
|
- 3.0 GPM
- Adjustable pressure relief valve preset at the factory for 200 P.S.I.
- 1/2 H.P. ball bearing motor (115 or 230 volt)
- Swivel inlet connection
- 10' of quick-disconnect hose has an exclusive built-in, one-way valve to permit the pump from being easily seperated from the pressureized system - as is often required by the inspector
- Aluminum cart w/ 10" tires
|
|
|
|
- 3.0 GPM
- Adjustable pressure relief valve preset for 500 P.S.I
- 1 H.P. T.E.F.C. ball bearing motor (115 or 230 volt) with a 115% service load factor
- Overload protected with capacitor starting
- Built-in full-flow, by-pass system
- Includes 10 ft. of quick-disconnect, high pressure hose
|
|
|
|
- Adjustable 0-1200 P.S.I pressure relief valve preset for 200 P.S.I.
- Gasoline Engine
- Built-in full-flow, by-pass system
- Includes 10ft. of quick-disconnect, high pressure hose
- Aluminum cart w/ 10" tires
|
|
|
|
- 9.5 GPM -- 550 PSI
- Self priming, twin diaphragm pump
- Gas Engine
|